


Drilling machine Ibarmia A-50
Technical specification
| Category | Drilling |
| Make | IBARMIA |
| Condition | Used |
| Location | Spain |
Description
Ibarmia A-50 pillar drill
The A-50 is an Ibarmia pillar drill with 50 mm drilling capacity, Morse 4 taper and gear transmission. The head carries the A-50 marking and the manufacturer's logo.
What the model offers
According to a used-machine listing for another example of the model, the A-50 offers 9 speeds, 3 power feeds and 260 mm drilling depth. These are model data, not confirmed on this unit.
Configuration of this unit
Model: A-50 (marking on the head)
Type: pillar
Drilling capacity: 50 mm
Taper: MT-4 (Morse 4)
Transmission: gears
Main motor power: 3.3 kW (according to our data sheet)
Year: 2000 (according to our data sheet)
Transparent spindle guard and mushroom-head emergency stop
T-slotted table and base, speed chart on the head
Typical applications
Drilling of fabricated and general engineering parts requiring 50 mm capacity and a Morse 4 taper spindle.
See it at Ferrotall
The drill is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The A-50 is an Ibarmia pillar drill with 50 mm drilling capacity, Morse 4 taper and gear transmission. The head carries the A-50 marking and the manufacturer's logo.
What the model offers
According to a used-machine listing for another example of the model, the A-50 offers 9 speeds, 3 power feeds and 260 mm drilling depth. These are model data, not confirmed on this unit.
Configuration of this unit
Model: A-50 (marking on the head)
Type: pillar
Drilling capacity: 50 mm
Taper: MT-4 (Morse 4)
Transmission: gears
Main motor power: 3.3 kW (according to our data sheet)
Year: 2000 (according to our data sheet)
Transparent spindle guard and mushroom-head emergency stop
T-slotted table and base, speed chart on the head
Typical applications
Drilling of fabricated and general engineering parts requiring 50 mm capacity and a Morse 4 taper spindle.
See it at Ferrotall
The drill is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/drilling-machine-ibarmia-a-50
