





Double-column machining centre Takumi H13
Technical specification
| Category | Machining centres |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
Takumi H13 double column machining centre
The Takumi H13 is a double column machining centre with a 900 x 1,400 mm table and 900 x 1,300 x 700 mm travels, suited to medium-sized and large parts: moulds, fixtures and machinery components.
Key strengths
The Takumi H series models listed on machinery portals come with Heidenhain controls, and this unit has an electrical cabinet with Heidenhain drives visible in the photos. According to our data sheet, the spindle reaches 15,000 rpm, a speed designed for small-diameter tools and light materials such as aluminium.
Configuration of this unit
Model: H13 (marked on the front)
Control: Heidenhain 530 (Heidenhain drives in the cabinet)
Table: 900 x 1,400 mm
X, Y, Z travels: 900 x 1,300 x 700 mm
Taper: BBT-40
Spindle: 15,000 rpm
Through-tool coolant
Disc-type tool magazine with positions numbered up to 30
Scraper-type swarf conveyor
Year: 2015
Overall dimensions: 5,620 x 4,640 x 3,940 mm; weight 18,000 kg
Typical applications
Milling of moulds and fixtures, machining of medium-sized and large prismatic parts, and high-speed cutting of aluminium.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Takumi H13 is a double column machining centre with a 900 x 1,400 mm table and 900 x 1,300 x 700 mm travels, suited to medium-sized and large parts: moulds, fixtures and machinery components.
Key strengths
The Takumi H series models listed on machinery portals come with Heidenhain controls, and this unit has an electrical cabinet with Heidenhain drives visible in the photos. According to our data sheet, the spindle reaches 15,000 rpm, a speed designed for small-diameter tools and light materials such as aluminium.
Configuration of this unit
Model: H13 (marked on the front)
Control: Heidenhain 530 (Heidenhain drives in the cabinet)
Table: 900 x 1,400 mm
X, Y, Z travels: 900 x 1,300 x 700 mm
Taper: BBT-40
Spindle: 15,000 rpm
Through-tool coolant
Disc-type tool magazine with positions numbered up to 30
Scraper-type swarf conveyor
Year: 2015
Overall dimensions: 5,620 x 4,640 x 3,940 mm; weight 18,000 kg
Typical applications
Milling of moulds and fixtures, machining of medium-sized and large prismatic parts, and high-speed cutting of aluminium.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/double-column-machining-centre-takumi-h13
