




Dividing head Spirsin 300 mm
Technical specification
| Category | Plants and Machinery |
| Make | SPIRSIN |
| Condition | Used |
| Location | Spain |
Description
What it is
Indexer (rotary table) made by Spirsin S.C.L. of Urnieta (Gipuzkoa), for angular positioning of workpieces on machining centres and milling machines. The plate on this unit shows model 81170F/225 and number 664, with CE marking.
Key strengths
Indexers allow a workpiece to be machined on several faces or with angular divisions without re-clamping it. This unit is shown with the jaw chuck mounted on the indexer housing, lifting eyebolts and a cable with connector for hooking it up.
Configuration of this unit
Model 81170F/225, number 664 (plate)
Manufacturer Spirsin S.C.L., Urnieta (plate)
Size 300 mm according to our title
3-jaw chuck fitted
Two lifting eyebolts on the housing
Wiring with connector
Supplied on a wooden pallet
Typical applications
Machining of parts with angular divisions, drilling on a pitch circle, milling of bodies and tooling manufacture.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Indexer (rotary table) made by Spirsin S.C.L. of Urnieta (Gipuzkoa), for angular positioning of workpieces on machining centres and milling machines. The plate on this unit shows model 81170F/225 and number 664, with CE marking.
Key strengths
Indexers allow a workpiece to be machined on several faces or with angular divisions without re-clamping it. This unit is shown with the jaw chuck mounted on the indexer housing, lifting eyebolts and a cable with connector for hooking it up.
Configuration of this unit
Model 81170F/225, number 664 (plate)
Manufacturer Spirsin S.C.L., Urnieta (plate)
Size 300 mm according to our title
3-jaw chuck fitted
Two lifting eyebolts on the housing
Wiring with connector
Supplied on a wooden pallet
Typical applications
Machining of parts with angular divisions, drilling on a pitch circle, milling of bodies and tooling manufacture.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/dividing-head-spirsin-300-mm
