













Cylindrical grinder studer type S-20 2
Technical specification
| Category | Grinders |
| Condition | Used |
| Location | Switzerland |
| Type | S-20 2 |
Description
– headstock CM4
– contre-headstock CM 2 (contre-Z6Z)
– 1 internal grinding device with spindle grinding Ø 80 ref 82060B housing tools
HJND 42 M10, Capacity 6-30 mm with 1 pulley Ø 25 mm, 1 cup holder ER-12
with nut ,1 clamp Ø 6
– 1 CM4/W-20 reduction socket
– 1 firing W-20
– 1 set of 10 clamps W-20
– 1 orientable diamond holder ref 1924.600
– 1 sine stop for table with fine adjustment device, without comparator ref 1908.712/710
– 1 stop for longitudinal slide ref 1916.600
– 1 control system like Sensitron
– 1 watering system ARO type P480x750
– 2 wheel-holder flasks
- 1 extractor
– 1 tailstock full half hard metal CM2
– 1 tailstock full hard metal CM4
– 1 drive disc with 1 caliper for grinding between points
Option
9250040 – 1 w-20 clamping key with CM4/W20 reduction socket, used chf. 500.+tva
800768 – 1 watering system Vertex PF-40 by paper filtration n°800768
capacity 120 Liters, ref 800768 chf. 2'400.- + tva
9250041 – 1 fast clamping device W-20 ref 1921.704 with CM4/W20 reduction,
opportunity chf. 800.- +tva
9250042 – 1 3 dog bezel Ø 2,5-80 mm ref 1914.600, occasion painted, chf. 800.– +tva
9250043 – 1 support bezel ref 1915.600, occasion repainted, chf. 600.– + tva
9250044 – 1 adjustable reversible dressing device, without diamond,
occasion painted chf. 1'800.– + tva
9250045 – 1 orientable diamond holder ref 1924.600, without diamond
occasion painted chf. 1'200.– + tva
9250046 – 1 magnetic plate Ø 150 mm CM4 ref 1930.707, occasion chf. 900.– + tva
9250047 – 1 gear to balance the grinding wheels chf. 500.– + tva
– 1 drive disc for chuck, nine chf .560.– + tva
Origin of manufacture Switzerland
Voltage 380/50/3
Net weight approx. 1600 kg
Customs position 8460.2920
235x155x145cm dimensions
TECHNICAL CHARACTERISTICS:
KEY DIMENSIONS:
height of points 100 mm
distance between points 400/650 mm
LONGITUDINAL COLUSSE:
travel max 420/650 mm
minimum self displacement 1 mm
speed vt 100-3500 mm/min
time of rollover 0-5 dry.
max table orientation 400/650 mm 30°/15°
TRANSVERSAL COLUSSE:
travel max 170 mm
fast movement 30 mm
Dia depth 1,9 mm
forward 1 0.03 – 1.5 mm/min
forward 2 0.02 – 0.3 mm/min
pulse sanding advance 0.0005-0.025 mm
WEAPON:
Wheel: dia. X width X bore 350x32x127 mm
drive power 3 kW
peripheral speed vs 30 m/s
number of turns 1600/1975/2200 min-1
manual movement 120 mm
right orientation 15°+30°
protective option for grinding gear max width 50 mm
PORTE-PIECE POUPEE
0° orientation – 90°
number of turns nw 80/175/380/800 min-1
inside cone walrus 4
W-20 clamps
drive power 0.5 kW
max weight of parts 20 kg
load during air grinding 12 Nm
continuous drive options adjustment range I 30-300 min-1
continuous drive options adjustment range II 120-1200 min-1
COUNTER-POUPEE:
inside cone walrus 2
travel of the sheath 20 mm
PRECISION OF WORK GUARANTEE:
generator correct Gonna:
between points 400 mm
measured on 400 mm 0.002 mm upholding
between points 650 mm
measured on 650 mm 0.003 mm
circulatory accuracy for air rectification 0.0004 mm
VALUE OF ACCORDANCE:
max power absorbed 8 kVA
max permissible voltage variations –15 % + 10 %
Maximum allowable frequency variations +/- 3 %
compressed air 5 bar
any error or Suddenly omission the technical information is given to you without commitment
– contre-headstock CM 2 (contre-Z6Z)
– 1 internal grinding device with spindle grinding Ø 80 ref 82060B housing tools
HJND 42 M10, Capacity 6-30 mm with 1 pulley Ø 25 mm, 1 cup holder ER-12
with nut ,1 clamp Ø 6
– 1 CM4/W-20 reduction socket
– 1 firing W-20
– 1 set of 10 clamps W-20
– 1 orientable diamond holder ref 1924.600
– 1 sine stop for table with fine adjustment device, without comparator ref 1908.712/710
– 1 stop for longitudinal slide ref 1916.600
– 1 control system like Sensitron
– 1 watering system ARO type P480x750
– 2 wheel-holder flasks
- 1 extractor
– 1 tailstock full half hard metal CM2
– 1 tailstock full hard metal CM4
– 1 drive disc with 1 caliper for grinding between points
Option
9250040 – 1 w-20 clamping key with CM4/W20 reduction socket, used chf. 500.+tva
800768 – 1 watering system Vertex PF-40 by paper filtration n°800768
capacity 120 Liters, ref 800768 chf. 2'400.- + tva
9250041 – 1 fast clamping device W-20 ref 1921.704 with CM4/W20 reduction,
opportunity chf. 800.- +tva
9250042 – 1 3 dog bezel Ø 2,5-80 mm ref 1914.600, occasion painted, chf. 800.– +tva
9250043 – 1 support bezel ref 1915.600, occasion repainted, chf. 600.– + tva
9250044 – 1 adjustable reversible dressing device, without diamond,
occasion painted chf. 1'800.– + tva
9250045 – 1 orientable diamond holder ref 1924.600, without diamond
occasion painted chf. 1'200.– + tva
9250046 – 1 magnetic plate Ø 150 mm CM4 ref 1930.707, occasion chf. 900.– + tva
9250047 – 1 gear to balance the grinding wheels chf. 500.– + tva
– 1 drive disc for chuck, nine chf .560.– + tva
Origin of manufacture Switzerland
Voltage 380/50/3
Net weight approx. 1600 kg
Customs position 8460.2920
235x155x145cm dimensions
TECHNICAL CHARACTERISTICS:
KEY DIMENSIONS:
height of points 100 mm
distance between points 400/650 mm
LONGITUDINAL COLUSSE:
travel max 420/650 mm
minimum self displacement 1 mm
speed vt 100-3500 mm/min
time of rollover 0-5 dry.
max table orientation 400/650 mm 30°/15°
TRANSVERSAL COLUSSE:
travel max 170 mm
fast movement 30 mm
Dia depth 1,9 mm
forward 1 0.03 – 1.5 mm/min
forward 2 0.02 – 0.3 mm/min
pulse sanding advance 0.0005-0.025 mm
WEAPON:
Wheel: dia. X width X bore 350x32x127 mm
drive power 3 kW
peripheral speed vs 30 m/s
number of turns 1600/1975/2200 min-1
manual movement 120 mm
right orientation 15°+30°
protective option for grinding gear max width 50 mm
PORTE-PIECE POUPEE
0° orientation – 90°
number of turns nw 80/175/380/800 min-1
inside cone walrus 4
W-20 clamps
drive power 0.5 kW
max weight of parts 20 kg
load during air grinding 12 Nm
continuous drive options adjustment range I 30-300 min-1
continuous drive options adjustment range II 120-1200 min-1
COUNTER-POUPEE:
inside cone walrus 2
travel of the sheath 20 mm
PRECISION OF WORK GUARANTEE:
generator correct Gonna:
between points 400 mm
measured on 400 mm 0.002 mm upholding
between points 650 mm
measured on 650 mm 0.003 mm
circulatory accuracy for air rectification 0.0004 mm
VALUE OF ACCORDANCE:
max power absorbed 8 kVA
max permissible voltage variations –15 % + 10 %
Maximum allowable frequency variations +/- 3 %
compressed air 5 bar
any error or Suddenly omission the technical information is given to you without commitment
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/rectifieuse-cylindrique-studer-type-s-20-2/
