













Cylindrical grinder studer S36 cnc
Technical specification
| Category | Grinders |
| Condition | Used |
| Location | Switzerland |
| Type | S36 CNC |
Description
Complete reconditioned: Mechanical, geometry, hydraulic, and electrical parts (verified and/or replaced)
headstock wheel holder
Dismantling, cleaning parts, replacing worn and defective parts, overhauling the engine, replacing bearings, replacing belts, dismantling spindle, replacing seals and O-Ring + setting. New paint.
headstock coin holder
Dismantling, cleaning parts, replacing worn and defective parts, overhauling the engine, replacing belts. New bearings spindle. New paint. (Z3Z.)
Contre-headstock
Demonstrated, controlled reconditioned
Hydraulics
Dismantling, motor control, replace pipes, defective and worn parts. Control the hydraulic block
Axis X
Dismantling, replacing worn parts such as O-Ring, joints, segments etc., overhauling the hydraulic piston, correcting tables.
Z axis
Dismantling, correcting tables, replacing worn and defective parts, overhauling hydraulic piston, New paint.
Electrical cabinet
Full control, change of various relays.
Painting
Colors: White RAL 9003 and grey RAL 7011
Geometry according to manufacturer's protocol.
Control and cleaning of various accessories
Origin of manufacture CH
Voltage 400V 50Hz
Dimensions 2700x2350x2100 mm
Net machine weight 4500 kg
TECHNICAL CHARACTERISTICS
Fanuc 16i-T command
Peak height 175 mm
Distance between point 1000 mm
LINEARIES
Length of grinding 500 mm
Races X : 267 mm
Z: 650 mm
WEAPONS
Continuous orientation +/- 8.5°
Outer wheel size 500x80x203 mm
Power 7.5 kW
Speed 44 m/sec.
PORTE-PIECE POUPEE
Type of cone CM5
Axis C +/- 5°
Power 1 kW
Rotation speed 30-1000 min-1
FIGHTING
Type of cone CM3
travel fork 35 mm
Diameter fork Ø 50 mm
Max part weight 130 kg
ELECTRIC FOOD
Voltage 400V 50 Hz
If there is any error or omission, the technical information is given to you without obligation.
headstock wheel holder
Dismantling, cleaning parts, replacing worn and defective parts, overhauling the engine, replacing bearings, replacing belts, dismantling spindle, replacing seals and O-Ring + setting. New paint.
headstock coin holder
Dismantling, cleaning parts, replacing worn and defective parts, overhauling the engine, replacing belts. New bearings spindle. New paint. (Z3Z.)
Contre-headstock
Demonstrated, controlled reconditioned
Hydraulics
Dismantling, motor control, replace pipes, defective and worn parts. Control the hydraulic block
Axis X
Dismantling, replacing worn parts such as O-Ring, joints, segments etc., overhauling the hydraulic piston, correcting tables.
Z axis
Dismantling, correcting tables, replacing worn and defective parts, overhauling hydraulic piston, New paint.
Electrical cabinet
Full control, change of various relays.
Painting
Colors: White RAL 9003 and grey RAL 7011
Geometry according to manufacturer's protocol.
Control and cleaning of various accessories
Origin of manufacture CH
Voltage 400V 50Hz
Dimensions 2700x2350x2100 mm
Net machine weight 4500 kg
TECHNICAL CHARACTERISTICS
Fanuc 16i-T command
Peak height 175 mm
Distance between point 1000 mm
LINEARIES
Length of grinding 500 mm
Races X : 267 mm
Z: 650 mm
WEAPONS
Continuous orientation +/- 8.5°
Outer wheel size 500x80x203 mm
Power 7.5 kW
Speed 44 m/sec.
PORTE-PIECE POUPEE
Type of cone CM5
Axis C +/- 5°
Power 1 kW
Rotation speed 30-1000 min-1
FIGHTING
Type of cone CM3
travel fork 35 mm
Diameter fork Ø 50 mm
Max part weight 130 kg
ELECTRIC FOOD
Voltage 400V 50 Hz
If there is any error or omission, the technical information is given to you without obligation.
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/rectifieuse-cylindrique-studer-s36-cnc/
