














Cylindrical grinder KELLENBERGER 1500-U completely reconditioned
Technical specification
| Category | Grinders |
| Make | KELLENBERGER |
| Condition | Used |
| Location | Switzerland |
| Type | 1500-U |
| Size | Occasion |
| Make | KELLENBERGER |
Description
TECHNICAL CHARACTERISTICS
Distance between points 1500 mm
Distance between points headstock and overhang counter-
headstock 1650 mm
Point height, normal 125 mm
Height of points with 225/250 uplift sole
Maximum grinding diameter Ø 250 mm
Maximum grinding diameter, with raised soles. 450/500 mm
Table
Useful surface area 2060×140 mm
Max length and width for plane 1750×200 mm
Manual or hydraulic longitudinal displacement 1750 mm
Manual table movement, 1 lathe crank – coarse 20,006 mm
Manual table movement, 1 lathe crank – fine 2,457 mm
Table, continuous, hydraulic speed -6 m/min
Pivotement table 6°
Stop, return dry 0-5.
Work spindle
Part speed, continuous electric 20-400 min-1
Pivotement 360°
Work spindle inside cone CM5
Contre-headstock
Interior cone of spindle contre-headstock CM3 (contre-Z14Z)
Return manual or hydraulic spindle speed 30 mm
Interior diamond dressage cone CM0
Universal grinding head
Cross-sectional movement of wheeled 285 mm
Quick movement of wheeled, front and rear zipper 40 mm
spindle grinding speeds 1500 – 1700 – 2200 – 3600 min-1
spindle vertical grinding movement, height of
points 125-330 mm
Wheel for cylindrical grinding, max 400x50x127 mm
Mount for flat grinding, max 250x20x76 mm
Pivotement of the grinding head with locking
all 90° 270°
Forward of the wheel
1 degree of the glassmaker 0.005 mm/Ø
Automatic advance, max 0.9 mm/Ø
Forward by return table, continuous 0.001-0.03 mm/Ø
Advance for diving grinding 0.001-0.05 mm/sec.
Micrometer stop, 1 graduation 0.001 mm/Ø
Engines
spindle grinding engine 2Z900 min-1 / 4,0 hp
spindle working engine 3Z000 min-1 / 2,0 hp
Engine DC 1,2 hp
Engine oil pump 2-760 min-1 / 1,0 hp
Engine pump cooling 2Z850 min-1 / 0,12 hp
Apparatus for grinding interiors
70 bore mm
spindle speed of rectifier.int. Ø70 mm. 14’000 min-1
Speed of spindle of rectifier.int. Ø50 mm 21Z000 min-1
If there is any error or omission, the technical information is given to you without obligation.
Distance between points 1500 mm
Distance between points headstock and overhang counter-
headstock 1650 mm
Point height, normal 125 mm
Height of points with 225/250 uplift sole
Maximum grinding diameter Ø 250 mm
Maximum grinding diameter, with raised soles. 450/500 mm
Table
Useful surface area 2060×140 mm
Max length and width for plane 1750×200 mm
Manual or hydraulic longitudinal displacement 1750 mm
Manual table movement, 1 lathe crank – coarse 20,006 mm
Manual table movement, 1 lathe crank – fine 2,457 mm
Table, continuous, hydraulic speed -6 m/min
Pivotement table 6°
Stop, return dry 0-5.
Work spindle
Part speed, continuous electric 20-400 min-1
Pivotement 360°
Work spindle inside cone CM5
Contre-headstock
Interior cone of spindle contre-headstock CM3 (contre-Z14Z)
Return manual or hydraulic spindle speed 30 mm
Interior diamond dressage cone CM0
Universal grinding head
Cross-sectional movement of wheeled 285 mm
Quick movement of wheeled, front and rear zipper 40 mm
spindle grinding speeds 1500 – 1700 – 2200 – 3600 min-1
spindle vertical grinding movement, height of
points 125-330 mm
Wheel for cylindrical grinding, max 400x50x127 mm
Mount for flat grinding, max 250x20x76 mm
Pivotement of the grinding head with locking
all 90° 270°
Forward of the wheel
1 degree of the glassmaker 0.005 mm/Ø
Automatic advance, max 0.9 mm/Ø
Forward by return table, continuous 0.001-0.03 mm/Ø
Advance for diving grinding 0.001-0.05 mm/sec.
Micrometer stop, 1 graduation 0.001 mm/Ø
Engines
spindle grinding engine 2Z900 min-1 / 4,0 hp
spindle working engine 3Z000 min-1 / 2,0 hp
Engine DC 1,2 hp
Engine oil pump 2-760 min-1 / 1,0 hp
Engine pump cooling 2Z850 min-1 / 0,12 hp
Apparatus for grinding interiors
70 bore mm
spindle speed of rectifier.int. Ø70 mm. 14’000 min-1
Speed of spindle of rectifier.int. Ø50 mm 21Z000 min-1
If there is any error or omission, the technical information is given to you without obligation.
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/rectifieuse-cylindrique-kellenberger-1500-ucompletement-revisee-avec-nouvelle-peinture/
