




CNC milling machine CME BF-01
Technical specification
| Category | Milling machines |
| Make | CME |
| Condition | Used |
| Location | Spain |
Description
Milling machine CNC CME BF-01
The CME BF-01 is a milling machine CNC with tool changer and closed cabin, for medium-sized parts - large in general mechanics, moulds and utility.
Strengths
CME is a Spanish manufacturer of milling machines. The BF series ads match Heidenhain TNC 410 control and ISO 50 cone, a combination designed to start the chip with conversational programming.
Configuration of this unit
Year: 1999
Heidenhain control (visible mark on the desk); sheet: TNC 410
Table: 1.800 x 600 mm; X / Y / Z routes: 1.700 x 700 x 850 mm
ISO 50 DIN 69871 cone; spindle to 3.000 rpm
12 changer positions; chip extractor; cooling through the tool
visible facing angle head and cabin with doors
weight: 10.500 kg
Typical applications
Machining of moulds, benches, housing and medium-sized parts in steel and cast.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The CME BF-01 is a milling machine CNC with tool changer and closed cabin, for medium-sized parts - large in general mechanics, moulds and utility.
Strengths
CME is a Spanish manufacturer of milling machines. The BF series ads match Heidenhain TNC 410 control and ISO 50 cone, a combination designed to start the chip with conversational programming.
Configuration of this unit
Year: 1999
Heidenhain control (visible mark on the desk); sheet: TNC 410
Table: 1.800 x 600 mm; X / Y / Z routes: 1.700 x 700 x 850 mm
ISO 50 DIN 69871 cone; spindle to 3.000 rpm
12 changer positions; chip extractor; cooling through the tool
visible facing angle head and cabin with doors
weight: 10.500 kg
Typical applications
Machining of moulds, benches, housing and medium-sized parts in steel and cast.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/fresadora-cnc-cme-bf-01
