







CNC machining centre Milltronics VM-22 S/N 7739
Technical specification
| Category | Machining centres |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
What it is
Milltronics VM22 vertical machining centre, made in the USA according to the label on the control itself. It is a medium-sized machine for milling tooling parts, moulds and mechanical components.
Strengths
This unit has Milltronics' own control, the Centurion 7, with an electronic handwheel on the console and an external keyboard. The 1,016 x 558 x 635 mm travels over a 1,143 x 635 mm table accommodate medium-sized parts.
Configuration of this unit
Model: Milltronics VM22
Control: Milltronics Centurion 7
Table: 1,143 x 635 mm; X/Y/Z travels: 1,016 / 558 / 635 mm
Automatic tool changer (according to data sheet); the photos show a carousel next to the spindle head
Vices mounted on the table
Weight: 7,000 kg
Typical applications
Milling of tooling, aluminium and steel parts, prototypes and short runs for subcontract work or in-house workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Milltronics VM22 vertical machining centre, made in the USA according to the label on the control itself. It is a medium-sized machine for milling tooling parts, moulds and mechanical components.
Strengths
This unit has Milltronics' own control, the Centurion 7, with an electronic handwheel on the console and an external keyboard. The 1,016 x 558 x 635 mm travels over a 1,143 x 635 mm table accommodate medium-sized parts.
Configuration of this unit
Model: Milltronics VM22
Control: Milltronics Centurion 7
Table: 1,143 x 635 mm; X/Y/Z travels: 1,016 / 558 / 635 mm
Automatic tool changer (according to data sheet); the photos show a carousel next to the spindle head
Vices mounted on the table
Weight: 7,000 kg
Typical applications
Milling of tooling, aluminium and steel parts, prototypes and short runs for subcontract work or in-house workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/cnc-machining-centre-milltronics-vm-22-s-n-7739
