






CNC lathe Shenyang CAK6150Ei
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | SHENYANG |
| Condition | Used |
| Location | Spain |
Description
Lathe CNC parallel Shenyang CAK6150Ei
The CAK6150Ei is a lathe CNC parallel Shenyang with 1.390 mm between points, 500 mm in diameter on bench and automatic turret, suitable for medium-sized revolution parts in general machining workshops.
Strengths
This unit has a Siemens Sinumerik control, the mark of which is read on the panel; according to our file is a 810D. According to the manufacturer of the control, it allows ISO code programming and turning cycles.
Configuration of this unit
Model: CAK6150Ei
Type: CNC parallel
Control: Siemens Sinumerik 810D according to tab (visible mark on photos)
Distance between points: 1.390 mm (sign "500 x 1390" in the tailstock)
Main hole: 70 mm
Diameter on car: 300 mm; maximum turning: 500 mm; on block: 500 mm
Automatic disk turret
chuck 3 claw and tailstock with steering wheel
Main engine power: 11 kW; spindle 2.200 rpm
Year: 2005
External measures: 3.285 x 2.120 x 1.770 mm; weight 2.650 kg
Typical applications
axes torneado and flanges of medium length, cylinder, refrained and threaded in short and medium series.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The CAK6150Ei is a lathe CNC parallel Shenyang with 1.390 mm between points, 500 mm in diameter on bench and automatic turret, suitable for medium-sized revolution parts in general machining workshops.
Strengths
This unit has a Siemens Sinumerik control, the mark of which is read on the panel; according to our file is a 810D. According to the manufacturer of the control, it allows ISO code programming and turning cycles.
Configuration of this unit
Model: CAK6150Ei
Type: CNC parallel
Control: Siemens Sinumerik 810D according to tab (visible mark on photos)
Distance between points: 1.390 mm (sign "500 x 1390" in the tailstock)
Main hole: 70 mm
Diameter on car: 300 mm; maximum turning: 500 mm; on block: 500 mm
Automatic disk turret
chuck 3 claw and tailstock with steering wheel
Main engine power: 11 kW; spindle 2.200 rpm
Year: 2005
External measures: 3.285 x 2.120 x 1.770 mm; weight 2.650 kg
Typical applications
axes torneado and flanges of medium length, cylinder, refrained and threaded in short and medium series.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-cnc-shenyang-cak6150ei
