









CNC lathe Pinacho 200X1000
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | PINACHO |
| Condition | Used |
| Location | Spain |
Description
Lathe CNC parallel Pinacho 200x1000
The Pinacho 200x1000 is a parallel lathe CNC with compact size, with 1.000 mm between points. Pinacho is a Spanish manufacturer of lathes; this model is used in general machining, maintenance and short series of revolution parts.
Strengths
Combine the centre lathe bench with Fagor numerical control and automatic turret, so that it can be machined in series without changing tools by hand. In the photos you can see the Fagor with electronic flyers for X and Z, the turret and the tailstock. (Z2Z.)
Configuration of this unit
Model 200x1000, parallel type
Control Fagor 8050 T (according to our tab)
Distance between points: 1.000 mm
Admitted diameter on bench: 400 mm; on car: 335 mm
spindle hole diameter: 42 mm
Bank width: 250 mm
Automatic turret, without motor tools
tailstock and chuck claw (visible in the photos)
Main engine power: 4 kW
External measures: 2.390 x 910 x 1.625 mm; weight: 1.030 kg
Typical applications
axes, small and medium-sized flanges and pieces of revolution, in steel, aluminium or brass, in both loose units and small series.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Pinacho 200x1000 is a parallel lathe CNC with compact size, with 1.000 mm between points. Pinacho is a Spanish manufacturer of lathes; this model is used in general machining, maintenance and short series of revolution parts.
Strengths
Combine the centre lathe bench with Fagor numerical control and automatic turret, so that it can be machined in series without changing tools by hand. In the photos you can see the Fagor with electronic flyers for X and Z, the turret and the tailstock. (Z2Z.)
Configuration of this unit
Model 200x1000, parallel type
Control Fagor 8050 T (according to our tab)
Distance between points: 1.000 mm
Admitted diameter on bench: 400 mm; on car: 335 mm
spindle hole diameter: 42 mm
Bank width: 250 mm
Automatic turret, without motor tools
tailstock and chuck claw (visible in the photos)
Main engine power: 4 kW
External measures: 2.390 x 910 x 1.625 mm; weight: 1.030 kg
Typical applications
axes, small and medium-sized flanges and pieces of revolution, in steel, aluminium or brass, in both loose units and small series.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-cnc-pinacho-200x1000
