












CNC lathe Gildemeister NEF520
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | GILDEMEISTER |
| Condition | Used |
| Location | Spain |
Description
Lathe CNC Gildemeister NEF 520
The Gildemeister NEF 520 is a lathe CNC with 1.000 mm between 70 mm bar points and pass, of the Gildemeister NEF series, oriented to workshops working with medium-sized revolution pieces.
Strengths
In the machine there is a lubrication plate of the NEF series. This unit has a Heidenhain control, with the visible mark on the screen, and an auxiliary desk on the car.
Configuration of this unit
Model: NEF 520
Control: Heidenhain (screen mark)
Distance between points: 1.000 mm; bar step: 70 mm
Admitted diameter on car: 290 mm; on block: 500 mm
spindle to 3.000 rpm
Year: 2004
chuck 3 claw and tool turret
Cabin with doors and auxiliary control desk
Typical applications
axes torneado, flanges, casings and machinery components in small and medium series, as well as maintenance and repair work with conversational control.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Gildemeister NEF 520 is a lathe CNC with 1.000 mm between 70 mm bar points and pass, of the Gildemeister NEF series, oriented to workshops working with medium-sized revolution pieces.
Strengths
In the machine there is a lubrication plate of the NEF series. This unit has a Heidenhain control, with the visible mark on the screen, and an auxiliary desk on the car.
Configuration of this unit
Model: NEF 520
Control: Heidenhain (screen mark)
Distance between points: 1.000 mm; bar step: 70 mm
Admitted diameter on car: 290 mm; on block: 500 mm
spindle to 3.000 rpm
Year: 2004
chuck 3 claw and tool turret
Cabin with doors and auxiliary control desk
Typical applications
axes torneado, flanges, casings and machinery components in small and medium series, as well as maintenance and repair work with conversational control.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-cnc-gildemeister-nef520
