















CNC lathe Doosan Puma 500
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | DOOSAN |
| Condition | Used |
| Location | Spain |
Description
Used Doosan Puma 500 CNC lathe
The Doosan Puma 500 is a high-capacity CNC lathe: 1,575 mm between centres, 900 mm swing over bed and a 152 mm spindle bore, so it takes long parts and large-diameter bar or tube.
Key strengths
The Doosan (formerly Daewoo) Puma series is built for heavy turning, with a heavy-section bed and a high-power main motor, rated at 37/45 kW on this unit. The control is a Fanuc Series 21i-TB, as shown on the console fascia.
Configuration of this unit
Model: Puma 500
Control: Fanuc Series 21i-TB (fascia)
Distance between centres: 1,575 mm
Spindle bore: 152 mm
Swing over cross slide: 630 mm; over bed: 900 mm
Bed width: 500 mm; no gap bridge
Main motor power: 37/45 kW
Tool turret and swarf conveyor (photos)
Year: 2006
Overall dimensions: 4,800 x 2,500 x 2,700 mm; weight: 14,000 kg
Typical applications
Long, heavy turned parts: shafts, rollers, hydraulic cylinders, tubes, flanges and components for the energy, oil and heavy machinery sectors.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Doosan Puma 500 is a high-capacity CNC lathe: 1,575 mm between centres, 900 mm swing over bed and a 152 mm spindle bore, so it takes long parts and large-diameter bar or tube.
Key strengths
The Doosan (formerly Daewoo) Puma series is built for heavy turning, with a heavy-section bed and a high-power main motor, rated at 37/45 kW on this unit. The control is a Fanuc Series 21i-TB, as shown on the console fascia.
Configuration of this unit
Model: Puma 500
Control: Fanuc Series 21i-TB (fascia)
Distance between centres: 1,575 mm
Spindle bore: 152 mm
Swing over cross slide: 630 mm; over bed: 900 mm
Bed width: 500 mm; no gap bridge
Main motor power: 37/45 kW
Tool turret and swarf conveyor (photos)
Year: 2006
Overall dimensions: 4,800 x 2,500 x 2,700 mm; weight: 14,000 kg
Typical applications
Long, heavy turned parts: shafts, rollers, hydraulic cylinders, tubes, flanges and components for the energy, oil and heavy machinery sectors.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/cnc-lathe-doosan-puma-500
