
CNC lathe Daewoo Puma 350MB
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | DAEWOO |
| Condition | Used |
| Location | Spain |
Description
Lathe CNC Daewoo Puma 350MB
lathe CNC of the Puma series of Daewoo (now Doosan), with 1.050 mm between points and 102 mm hole in the spindle. for medium and long parts in general machining. (Z1Z.)
What the Puma 350 series provides
The market ads of the Puma 350 series describe it with 12 turret positions and high-stiffness inclined bench. According to our data sheet, this unit has motorized tools and control Fanuc 18T, without axis and no subspindle.
Configuration of this unit
Control: Fanuc 18T
Type: tilted block; year 2000
Distance between points: 1.050 mm
Barstep: 91 mm; main hole: 102 mm
Diameter on car: 480 mm; on bench: 700 mm; maximum turning: 460 mm
Automatic and motorized turret (according to tab)
No axis Y; no subspindle
spindle to 3.000 rpm
Measurements: 3.710 x 1.800 x 1.825 mm; weight: 5.860 kg
Typical applications
axes light-treaded and milling, flanges and general mechanical parts in short and medium series.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
lathe CNC of the Puma series of Daewoo (now Doosan), with 1.050 mm between points and 102 mm hole in the spindle. for medium and long parts in general machining. (Z1Z.)
What the Puma 350 series provides
The market ads of the Puma 350 series describe it with 12 turret positions and high-stiffness inclined bench. According to our data sheet, this unit has motorized tools and control Fanuc 18T, without axis and no subspindle.
Configuration of this unit
Control: Fanuc 18T
Type: tilted block; year 2000
Distance between points: 1.050 mm
Barstep: 91 mm; main hole: 102 mm
Diameter on car: 480 mm; on bench: 700 mm; maximum turning: 460 mm
Automatic and motorized turret (according to tab)
No axis Y; no subspindle
spindle to 3.000 rpm
Measurements: 3.710 x 1.800 x 1.825 mm; weight: 5.860 kg
Typical applications
axes light-treaded and milling, flanges and general mechanical parts in short and medium series.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-cnc-daewoo-puma-350mb
