





CNC lathe Daewoo Puma 240MC
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | DAEWOO |
| Condition | Used |
| Location | Spain |
Description
Doosan Daewoo Puma 240M slant-bed CNC lathe
The Puma 240M is a slant-bed CNC lathe from Daewoo (now Doosan), with live tooling in the turret, suited to batches of turned and milled parts in a single set-up, such as shafts, flanges and bushes. It takes a turning diameter of 300 mm and has a bar capacity of 65 mm.
Key strengths
According to listings for other units of this model, the Puma 240M series is offered with a 12-station turret, live tooling of up to 5,000 rpm and a spindle speed of 4,500 rpm; these figures are not confirmed for this unit. The Fanuc 0i-TC control given in our data sheet is a widely known control, with ISO code programming and canned turning cycles.
Configuration of this unit
Model: Puma 240M (marked on the door; our data sheet states 240MC)
Type: slant bed
Control: Fanuc 0i-TC (according to data sheet)
Distance between centres: 503 mm
Bar capacity: 65 mm
Swing over cross slide: 390 mm
Max. turning diameter: 300 mm
Live-tool turret: yes
Y axis: no · Sub-spindle: no
Main motor power: 18.5 kW
Year: 2007
Typical applications
Turning and milling of turned parts in a single set-up, production of shafts, flanges, fittings and bar-fed parts up to 65 mm in diameter.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Puma 240M is a slant-bed CNC lathe from Daewoo (now Doosan), with live tooling in the turret, suited to batches of turned and milled parts in a single set-up, such as shafts, flanges and bushes. It takes a turning diameter of 300 mm and has a bar capacity of 65 mm.
Key strengths
According to listings for other units of this model, the Puma 240M series is offered with a 12-station turret, live tooling of up to 5,000 rpm and a spindle speed of 4,500 rpm; these figures are not confirmed for this unit. The Fanuc 0i-TC control given in our data sheet is a widely known control, with ISO code programming and canned turning cycles.
Configuration of this unit
Model: Puma 240M (marked on the door; our data sheet states 240MC)
Type: slant bed
Control: Fanuc 0i-TC (according to data sheet)
Distance between centres: 503 mm
Bar capacity: 65 mm
Swing over cross slide: 390 mm
Max. turning diameter: 300 mm
Live-tool turret: yes
Y axis: no · Sub-spindle: no
Main motor power: 18.5 kW
Year: 2007
Typical applications
Turning and milling of turned parts in a single set-up, production of shafts, flanges, fittings and bar-fed parts up to 65 mm in diameter.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/cnc-lathe-daewoo-puma-240mc
