
CNC binding machine Tejero H-35
Technical specification
| Category | Sheet Metalforming machines |
| Make | TEJERO |
| Condition | Used |
| Location | Spain |
Description
Used Tejero H-35 CNC tube bender
CNC-driven tube bender from the Spanish manufacturer Tejero, with a bending capacity of 35 mm diameter by 1.5 mm wall thickness (R-40). It is used to produce bent tube parts in series.
What this tube bender offers
According to the data sheet, this unit bends with radii from 20 to 160 mm. The photo shows two bending heads and control pendants.
Configuration of this unit
Model: H-35 NC; CNC drive
Bending capacity: Ø 35 x 1.5 mm (R-40)
Minimum bending radius: 20 mm; maximum: 160 mm
Overall dimensions: 3,200 x 1,070 x 715 mm
Two bending heads and two control pendants visible
Typical applications
Tube for metal furniture, light structures, exhausts, handrails, frames and pipework.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
CNC-driven tube bender from the Spanish manufacturer Tejero, with a bending capacity of 35 mm diameter by 1.5 mm wall thickness (R-40). It is used to produce bent tube parts in series.
What this tube bender offers
According to the data sheet, this unit bends with radii from 20 to 160 mm. The photo shows two bending heads and control pendants.
Configuration of this unit
Model: H-35 NC; CNC drive
Bending capacity: Ø 35 x 1.5 mm (R-40)
Minimum bending radius: 20 mm; maximum: 160 mm
Overall dimensions: 3,200 x 1,070 x 715 mm
Two bending heads and two control pendants visible
Typical applications
Tube for metal furniture, light structures, exhausts, handrails, frames and pipework.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/cnc-bending-machine-tejero-h-35
