









Bridge Milling Machine Correa Anayak FP-50/50
Technical specification
| Category | Milling machines |
| Make | CORREA |
| Condition | Used |
| Location | Spain |
Description
Milling machine Correa Bridge Anayak FP 50/50
The PFP 50/50 is a large-format milling machine bridge for heavy and long parts: bins, machined welded structures, large moulds and utilages, and components for energy, equipment and civil work.
Strengths
According to the manufacturer, the FP series combines the bridge design with an oversized structure and temperate and rectified guides, seeking stiffness, damping and precision. This unit is governed by Heidenhain control, with a portable electronic steering wheel and a Heidenhain receiver for palpators (TT / TS) visible in the photos.
Configuration of this unit
Model FP 50, year 2014; serial number of the electric cabinet 4584/14
Heidenhain 530 i TNC control
X / Y / Z tours: 5.000 x 3.800 x 1.250 mm
Table: 5.000 x 2.500 mm; Maximum permitted weight: 30.000 kg
BT50 cone; Mandrine power: 37 kW (cabinet plate)
head with manual turn
Portable electronic flyer
External measures: 14.520 x 7.018 x 6.250 mm; weight: 64.000 kg
Typical applications
Milling of large parts in one placement, machining of faces and accommodation in heavy structures and large-format horseshoe works.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The PFP 50/50 is a large-format milling machine bridge for heavy and long parts: bins, machined welded structures, large moulds and utilages, and components for energy, equipment and civil work.
Strengths
According to the manufacturer, the FP series combines the bridge design with an oversized structure and temperate and rectified guides, seeking stiffness, damping and precision. This unit is governed by Heidenhain control, with a portable electronic steering wheel and a Heidenhain receiver for palpators (TT / TS) visible in the photos.
Configuration of this unit
Model FP 50, year 2014; serial number of the electric cabinet 4584/14
Heidenhain 530 i TNC control
X / Y / Z tours: 5.000 x 3.800 x 1.250 mm
Table: 5.000 x 2.500 mm; Maximum permitted weight: 30.000 kg
BT50 cone; Mandrine power: 37 kW (cabinet plate)
head with manual turn
Portable electronic flyer
External measures: 14.520 x 7.018 x 6.250 mm; weight: 64.000 kg
Typical applications
Milling of large parts in one placement, machining of faces and accommodation in heavy structures and large-format horseshoe works.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/fresadora-puente-correa-anayak-fp-50-50
