





Boring mill Ayce 90
Technical specification
| Category | Borers |
| Make | AYCE |
| Condition | Used |
| Location | Spain |
Description
What is it?
boring mill conventional horizontal Ayce model 90, with spindle 90 mm diameter according to the tab. It is used for mandrination, milling and drilling of large pieces, and is on occasion in Ferrotall.
Strengths
A boring mill of this type works with the spindle in horizontal on a column with removable head, which allows to machine several sides of a large piece in a single fixation. In this unit the head groups the forward controls, the steering wheel and the speed selector.
Configuration of this unit
Brand and model: Ayce 90 (Ayce sign in head and steering wheel)
Type: conventional, horizontal spindle
spindle diameter: 90 mm
X, Y, Z: 1.000, 2.000 and 2.000 tours, according to tab (without unit)
Table: 1.140 x 970 (depending on file, without unit)
Fagor 3 Visualizer with 'Brocha / Carro' selector (axes)
chuck of refrentar with radial car
Typical applications
Machining of benches, housing, reducer boxes and heavy parts of cast or welding that require precise mandrination.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
boring mill conventional horizontal Ayce model 90, with spindle 90 mm diameter according to the tab. It is used for mandrination, milling and drilling of large pieces, and is on occasion in Ferrotall.
Strengths
A boring mill of this type works with the spindle in horizontal on a column with removable head, which allows to machine several sides of a large piece in a single fixation. In this unit the head groups the forward controls, the steering wheel and the speed selector.
Configuration of this unit
Brand and model: Ayce 90 (Ayce sign in head and steering wheel)
Type: conventional, horizontal spindle
spindle diameter: 90 mm
X, Y, Z: 1.000, 2.000 and 2.000 tours, according to tab (without unit)
Table: 1.140 x 970 (depending on file, without unit)
Fagor 3 Visualizer with 'Brocha / Carro' selector (axes)
chuck of refrentar with radial car
Typical applications
Machining of benches, housing, reducer boxes and heavy parts of cast or welding that require precise mandrination.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/mandrinadora-ayce-90
