Home / Metal forming / Erosion, electrochemical and ultrasonic machines / Benchtop EDM machine T.S.C. N20







Benchtop EDM machine T.S.C. N20
Technical specification
| Category | Erosion, electrochemical and ultrasonic machines |
| Make | T.S.C. |
| Condition | Used |
| Location | Spain |
Description
T.S.C. N20 bench-top EDM
T.S.C. N20 bench-top die-sinking EDM machine with the generator in a separate cabinet. It is used to machine cavities and slots in hardened steel in die making, mould making and tooling.
Configuration of this unit
Model: N20
Type: die-sinking, bench-top
Drive: manual
Electrode changer: no
Tank dimensions: 430 x 480 x 300 mm
Head with T.S.C. logo and depth dial gauge on the column
Two-axis Fagor digital readout, X and Y
Generator cabinet marked «Electro-Discharge Equipment, Dodworth, Barnsley, England», with analogue meter, selectors and emergency stop
Pressure gauges next to the tank
Separate tank with level indicator
Metal support table
Typical applications
Cavities and notches in moulds, inserts and hardened-steel tooling, and repair of parts with broken taps.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
T.S.C. N20 bench-top die-sinking EDM machine with the generator in a separate cabinet. It is used to machine cavities and slots in hardened steel in die making, mould making and tooling.
Configuration of this unit
Model: N20
Type: die-sinking, bench-top
Drive: manual
Electrode changer: no
Tank dimensions: 430 x 480 x 300 mm
Head with T.S.C. logo and depth dial gauge on the column
Two-axis Fagor digital readout, X and Y
Generator cabinet marked «Electro-Discharge Equipment, Dodworth, Barnsley, England», with analogue meter, selectors and emergency stop
Pressure gauges next to the tank
Separate tank with level indicator
Metal support table
Typical applications
Cavities and notches in moulds, inserts and hardened-steel tooling, and repair of parts with broken taps.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/benchtop-edm-machine-t-s-c-n20
