



Bandsaw Sabi EB-250A
Technical specification
| Category | Sawing, Filing and Cutting-off |
| Make | SABI |
| Condition | Used |
| Location | Spain |
Description
Band saw automatic Sabi EB-250A
band saw with automatic power for bar cutting, tube and serial profile. The EB 250 A model appears in relief on the arch housing.
The machine has a plate with the cutting speed table according to thickness and material, controls with two axes levers, selector, swivel adjustment regulator, emergency stop and a digital screen. The arc is protected by a transparent housing with a sheet cut.
Configuration of this unit
Model: EB-250A (relief of the housing and tab).
Type: tape.
Drive: automatic (tab).
Automatic power supply: yes (tab).
"250" capacity (tab, without unit).
Clear protection with sheet cutter.
Digital screen in the control box.
Cylinder and support rollers next to the gag.
Typical applications
Round, square, tube and profiles cutting in machining workshops, lockup and material stores, with serial cuts.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
band saw with automatic power for bar cutting, tube and serial profile. The EB 250 A model appears in relief on the arch housing.
The machine has a plate with the cutting speed table according to thickness and material, controls with two axes levers, selector, swivel adjustment regulator, emergency stop and a digital screen. The arc is protected by a transparent housing with a sheet cut.
Configuration of this unit
Model: EB-250A (relief of the housing and tab).
Type: tape.
Drive: automatic (tab).
Automatic power supply: yes (tab).
"250" capacity (tab, without unit).
Clear protection with sheet cutter.
Digital screen in the control box.
Cylinder and support rollers next to the gag.
Typical applications
Round, square, tube and profiles cutting in machining workshops, lockup and material stores, with serial cuts.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/sierra-cinta-sabi-eb-250a-1
