











AFFUTEUSE TECHNICA HMS-5500
Technical specification
| Category | Plants and Machinery |
| Make | TECHNICA |
| Condition | Used |
| Location | Switzerland |
| Type | HMS-5500 |
| Size | Occasion |
| Make | TECHNICA |
Description
Origin of manufacture : CH
Voltage: 380V/50Hz/3ph
Dimensions : 110x65x145 cm
Net machine weight : 370 kg
TECHNICAL CHARACTERISTICS
Carrier group
Wheel speed: 2600-3500-4700-6400-8700 min-1
travel oscillating arm (in the centre of the wheel): 155 mm
Radius in the centre of the wheel: 270 mm
travel of the cup holder: 70 mm
Wheel motor power (3000 min-1): 0,35 CV
Holder group
Speeds of spindle part holder (continuous), 2 speed ranges: 35-350 and 135-1350 min-1
Schaublin type W15 clamps, with max. capacity: Ø 13 mm.
Drilling in the spindle part holder (outside): Ø10,5 mm.
Number of teeth of the divider (for divisions of 3°): 120
Maximum headstock tilt: 100° right / 40° left
Coulisseau longitudinal, travel 110 mm., adjustment with steering wheel: 0.002 mm/trait
Vertical Coulisseau, travel 60 mm., 0.01 setting
Part engine power (1500 min-1): 0,25 CV
If there is any error or omission, the technical information is given to you without obligation.
Voltage: 380V/50Hz/3ph
Dimensions : 110x65x145 cm
Net machine weight : 370 kg
TECHNICAL CHARACTERISTICS
Carrier group
Wheel speed: 2600-3500-4700-6400-8700 min-1
travel oscillating arm (in the centre of the wheel): 155 mm
Radius in the centre of the wheel: 270 mm
travel of the cup holder: 70 mm
Wheel motor power (3000 min-1): 0,35 CV
Holder group
Speeds of spindle part holder (continuous), 2 speed ranges: 35-350 and 135-1350 min-1
Schaublin type W15 clamps, with max. capacity: Ø 13 mm.
Drilling in the spindle part holder (outside): Ø10,5 mm.
Number of teeth of the divider (for divisions of 3°): 120
Maximum headstock tilt: 100° right / 40° left
Coulisseau longitudinal, travel 110 mm., adjustment with steering wheel: 0.002 mm/trait
Vertical Coulisseau, travel 60 mm., 0.01 setting
Part engine power (1500 min-1): 0,25 CV
If there is any error or omission, the technical information is given to you without obligation.
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/affuteuse-technica-hms-5500/
