







AFFUTEUSE of drills, type 2-32 (CHRISTEN)
Technical specification
| Category | Drilling |
| Condition | Used |
| Location | Switzerland |
| Type | 2-32 |
Description
Origin of manufacture Switzerland
380/50/3 voltage
Net weight 250
Customs position 8460.3930
Dimensions 80x80x130 cm
TECHNICAL CHARACTERISTICS:
Working capacity
Cylindrical tail forests 2 to 32 mm dia.
Conical tail forests CM, No Dance, 1, 2 and 3
Length of forest to be sharpened unlimited
Divisions for number of lips 2-3-4-5-6-10-12-15-20-30-60
REGISTRATION CAPACITY
Point angle 40° to 180°
Helix angle 15° to 60°
Discalibration angle up to 15°
Angle of the axial edge, relative to the lip
normally cutting 55°
Engine power: – in continuous service 0,5 CV
in advanced service 0,75 CV
Wheel speed 3000 t/min
Shaft diameter 150 mm
If Senators have made an error or omission, the technical information is given to you without obligation.
380/50/3 voltage
Net weight 250
Customs position 8460.3930
Dimensions 80x80x130 cm
TECHNICAL CHARACTERISTICS:
Working capacity
Cylindrical tail forests 2 to 32 mm dia.
Conical tail forests CM, No Dance, 1, 2 and 3
Length of forest to be sharpened unlimited
Divisions for number of lips 2-3-4-5-6-10-12-15-20-30-60
REGISTRATION CAPACITY
Point angle 40° to 180°
Helix angle 15° to 60°
Discalibration angle up to 15°
Angle of the axial edge, relative to the lip
normally cutting 55°
Engine power: – in continuous service 0,5 CV
in advanced service 0,75 CV
Wheel speed 3000 t/min
Shaft diameter 150 mm
If Senators have made an error or omission, the technical information is given to you without obligation.
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/affuteuse-de-forets-christen-type-2-32-2/
