












5-axis machining centre GROB G-350
Technical specification
| Category | Machining centres |
| Make | GROB |
| Condition | Used |
| Location | Spain |
Description
Universal 5-axis centre for complex parts
The GROB G350 is a universal 5-axis machining centre from the G series by GROB, a German manufacturer. It allows parts to be machined on five sides in a single set-up and simultaneous 5-axis milling, so it is used in aerospace, moulds, automotive, medical technology and precision subcontracting.
Model highlights
According to GROB, the G series works with the spindle in a horizontal position and an axis arrangement that favours free swarf fall and excellent access to the workpiece. The Siemens 840D control is one of the reference controls in 5-axis machining, with specific coordinate transformation and simultaneous interpolation functions.
Configuration of this unit
Model: G350 (5-axis), year 2012
Control: Siemens 840D
Travels X, Y, Z: 600 x 770 x 805 mm
Taper: HSK-A63
Spindle: 12,000 rpm
Through-tool coolant
40-tool magazine
Swarf conveyor
Overall dimensions: 4,800 x 4,150 x 2,650 mm
Weight: 13,000 kg
Typical applications
Complete machining of complex prismatic parts, housings and valve bodies, aluminium and titanium structural components, electrodes and mould inserts, and parts that require several faces from a single set-up.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The GROB G350 is a universal 5-axis machining centre from the G series by GROB, a German manufacturer. It allows parts to be machined on five sides in a single set-up and simultaneous 5-axis milling, so it is used in aerospace, moulds, automotive, medical technology and precision subcontracting.
Model highlights
According to GROB, the G series works with the spindle in a horizontal position and an axis arrangement that favours free swarf fall and excellent access to the workpiece. The Siemens 840D control is one of the reference controls in 5-axis machining, with specific coordinate transformation and simultaneous interpolation functions.
Configuration of this unit
Model: G350 (5-axis), year 2012
Control: Siemens 840D
Travels X, Y, Z: 600 x 770 x 805 mm
Taper: HSK-A63
Spindle: 12,000 rpm
Through-tool coolant
40-tool magazine
Swarf conveyor
Overall dimensions: 4,800 x 4,150 x 2,650 mm
Weight: 13,000 kg
Typical applications
Complete machining of complex prismatic parts, housings and valve bodies, aluminium and titanium structural components, electrodes and mould inserts, and parts that require several faces from a single set-up.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/5-axis-machining-centre-grob-g-350
