Home / Metal cutting / Machining centres / 5-axis double-column machining centre Hurco DCX 42-5Si HSK-A100





5-axis double-column machining centre Hurco DCX 42-5Si HSK-A100
Technical specification
| Category | Machining centres |
| Make | TAKUMI & HURCO |
| Condition | Used |
| Location | Spain |
Description
The Hurco DCX 42-5Si HSK-A100 is a 5-axis gantry centre of the DCX series that, judging by its designation, is based on the DCX 42 platform, the largest in the series. Hurco presents it as a 5-axis gantry-type vertical machining centre and, as its designation indicates, it is fitted with a spindle with an HSK-A100 taper, compared with the HSK-A63 of the DCX 32-5Si.
It is based on the DCX platform, Hurco's double-column series for large, heavy and complex parts: a rigid gantry structure, cast-iron bed and easy access to the working area. It is designed for large, complex parts that must be machined on several faces in a single set-up, such as large-format moulds, frames and structural components.
Hurco has not yet published the full technical data for this model (travels, table, power and magazine). Contact Ferrotall: we will send you the updated datasheet from Hurco Werkzeugmaschinen GmbH and advise you on configuration and foundations.
Like all Hurco machines, it is programmed with the MAX5 and WinMax control, conversationally at the machine or in ISO code from CAM.
It is based on the DCX platform, Hurco's double-column series for large, heavy and complex parts: a rigid gantry structure, cast-iron bed and easy access to the working area. It is designed for large, complex parts that must be machined on several faces in a single set-up, such as large-format moulds, frames and structural components.
Hurco has not yet published the full technical data for this model (travels, table, power and magazine). Contact Ferrotall: we will send you the updated datasheet from Hurco Werkzeugmaschinen GmbH and advise you on configuration and foundations.
Like all Hurco machines, it is programmed with the MAX5 and WinMax control, conversationally at the machine or in ISO code from CAM.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/5-axis-double-column-machining-centre-hurco-dcx-42-5si-hsk-a100
