








2022 ACETI ART 144 Long belt pad sander
Technical specification
| Category | Plants and Machinery |
| Make | Aceti |
| Condition | Used |
| Location | United Kingdom |
Description
The pad polishing machine allows to carry out finishing and satin finishing operations on flat surfaces such as plates and sheets, bars and tubulars with square or rectangular section, and above all of large dimensions such as carters, boxes, fairings.
In addition to sanding, satin finishing and finishing in general, it is possible to carry out grinding and deburring operations on shear cut parts or with thermal cutting such as oxy-fuel and laser cutting. It is also possible to carry out deburring to remove weld seams on boxes and fairings.
Belts of any type of abrasive grain (corundum, zirconium, ceramic, diamond, agglomerate, cork, Trizact, Scotch-Brite etc. etc.) can be mounted to obtain different finishing qualities.
The processing of the details takes place by means of an abrasive belt and a pad that is moved manually by the operator.
The parts to be machined are positioned on the support table which is covered with fireproof material and is electrically motorized to adjust the height according to the thickness of the parts.
Optional extras included
Inverter for variable speed
Overhead roller pad
Power supply
400 | 50 | 3
Volt|Hz|Phase
Motor power
4,5 ( 6 )
kW ( hp )
Motor speed
700 - 1400
tr/min
Acoustic emission
85
dB
Overall dimension (Width x Depth x Height)
3700 x 2150 x H. 1600
mm
Weight standard machine
630
kg
Quantity of abrasive belt
1
No.
Abrasive belt dimension (wide x length)
150 x 7000
mm
Peripheral speed
11 - 22
m/sec
Workpiece thickness allowed
min. 1 ÷ max. 420
mm
Workpiece length allowed
max. 2400
mm
Workpiece width allowed
max. 800
mm
Workpiece weight allowed
max. 150
kg
In addition to sanding, satin finishing and finishing in general, it is possible to carry out grinding and deburring operations on shear cut parts or with thermal cutting such as oxy-fuel and laser cutting. It is also possible to carry out deburring to remove weld seams on boxes and fairings.
Belts of any type of abrasive grain (corundum, zirconium, ceramic, diamond, agglomerate, cork, Trizact, Scotch-Brite etc. etc.) can be mounted to obtain different finishing qualities.
The processing of the details takes place by means of an abrasive belt and a pad that is moved manually by the operator.
The parts to be machined are positioned on the support table which is covered with fireproof material and is electrically motorized to adjust the height according to the thickness of the parts.
Optional extras included
Inverter for variable speed
Overhead roller pad
Power supply
400 | 50 | 3
Volt|Hz|Phase
Motor power
4,5 ( 6 )
kW ( hp )
Motor speed
700 - 1400
tr/min
Acoustic emission
85
dB
Overall dimension (Width x Depth x Height)
3700 x 2150 x H. 1600
mm
Weight standard machine
630
kg
Quantity of abrasive belt
1
No.
Abrasive belt dimension (wide x length)
150 x 7000
mm
Peripheral speed
11 - 22
m/sec
Workpiece thickness allowed
min. 1 ÷ max. 420
mm
Workpiece length allowed
max. 2400
mm
Workpiece width allowed
max. 800
mm
Workpiece weight allowed
max. 150
kg
Imported from the Sparx Machine Tools Ltd stock feed (https://www.sparxmachinetools.co.uk/products.json). Source listing: https://www.sparxmachinetools.co.uk/products/2022-aceti-art-144-long-belt-pad-sander
