Données techniques
T R U M P F (Germany)
CNC - Controlled Hydraulic Press Brake
Model TRUMABEND V 85, year 1996 Serial No. 88 31 52
__________________________________________________________________________________
Pressure, max. 85 to
Working width, max. 2.050 mm
Working width between columns 1,750 mm
Side daylight of each column 410 mm
Max. distance
between upper and lower tool holder w/o tools 350 mm
Adjustment of upper tool holder approx. 300 mm
Table width approx 105 mm
Height of Table from floor approx. 1.050 mm
Max. stroke 215 mm
Stroke, bending speed 1 - 10 mm/sec
Stroke, rapid traverse 200/135 mm/sec
Adjustment range of back gauge, approx. 800 x 300 (vertical) mm
Total electrical load, approx. 10 kW - 400 V - 50 Hz
Weight, approx. 7,5 to
Accessories / Special Features:
* The stroke movement of the upper toolslide is driven by two hydraulic
pistons and proportional valves and controlled by two electronic
measurement scales.
Therefore it can be achieved a tilting line of the upper tool of
approx. 10 mm
* TRUMPF – CNC Control model DELEM Type DA 65 T with 6 controllable Axis
like:
Y1, Y2, X, R, Z1 a. Z 2, with direct programming of bending cycles on
the pendant control and screen with grafics.
* CNC-Controlled Cambering by separate control unit inside the table.
* Hydraulic driven fast clamping of upper and lower tools
* On backside of machine mounted a gauge stop slide controlled in 2 axis
( =R a.X-Axis) in vertical stroke and forward and backwards, three
sheet metal stopfingers.
* Two-handed release on mobile control stand, and/or foot switch.
* Pressure Manometer for the Hydraulic System and oil filter
* In front of machine there are 2 lengthwise adjustable sheet metal
supports.
* Various Bending tools smaller size,
* Swivable Safety covers on side and backside doors with plexi-glass
shields, etc.
Condition : Good to very good – stable design.
Machine can be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Marchand: HANS-JÜRGEN GEIGER MASCHINEN-VERTRIEB GmbH
Demande de prix