Données techniques
D U N K E S (Germany)
CNC Controlled Hydraulic Double Column Press
Model HD 10
Year 1993
________________________________________________________
Pressure 10 tons
Ram stroke 400 mm
Mounting height 600 mm
Table size 400 x 300 mm
Table height above floor 820 mm
Ram area 400 x 300 mm
Ram bore 40 mm
Quickspeed, downwards, max. 70 mm/s
Working speed, downwards, using max. pressure 40 mm/s
Working speed, min. 5 mm/s
Working speed adjustable from 5 - 70 mm/s
Return stroke speed, min./max. 20 / 175 mm/s
Drive 7.5 kW
Total electrical load, approx. 12 kW - 380 V - 50 Hz
Weight, approx. 6,500 kg
Accessories / Special Features
* DUNKES CNC Control, Model 200, can be programmed with
presettable parameters, e.g. Stroke, speed, forward and
return motion, pressing time, etc.
* Separate switch cabinet with floppy disk input.
* Pendant control with monitor.
* Two-handed release, in conjunction with pneumatic safety door.
* A turning device for calibrating and smoothing of bores is
mounted on the ram. (Calibrating mandrel moves into the bore
and rotates, powered by it own motor-driven timer. Repetitions
are controlled by stroke counter.)
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Marchand: HANS-JÜRGEN GEIGER MASCHINEN-VERTRIEB GmbH
Demande de prix