Technical details
SPECIFICATION
SHEET
MACHINE : - Makino MCD2016 Horizontal Machining
Centre
Serial No : - 118
Control :
- Makino Professional 3
Date of
Manufacture : - 2005
SPECIFICATION
Range of Movements
Table X axis 2000mm
Spindle Y axis 1600mm
Column Z axis 1500mm
Spindle centre to
pallet top 50
to 1650mm
Spindle nose to
pallet centre 450 to 1950mm
Pallet
Size 1300
x 1300mm
Pallet surface – T
slots 22mm H8 x 7
Maximum load on pallet 12,000kg
Pallet weight 1,500kg
Feedrate
X/Y/Z
Minimum increment 0.001mm
Jogging 1-4,000mm/min
Cutting 1-16,000mm/min
Rapid 16m/min
RJ 15/50 Spindle
Spindle nose BT50 Big Plus
Spindle motor 50kw
Spindle speed 20-15000rpm
Automatic Tool
Changer
Magazine capacity 99
Tool selection Random
Tool shank MAS403-BT50
Maximum diameter
of tool 300mm
Maximum length of
tool 700mm
Maximum weight of
tool 30kg
Tool Changing Time
Tool to tool Approximately 15 seconds
Metal to metal Approximately 18 seconds
Machine Accuracies
Positioning
Accuracy (Full Stroke) With Scale Feedback
X axis +/-.002
Y axis +/-.002
Z axis +/-.002
Index table (1
degree – standard) +/-3.0
secs per 360 deg.
B axis rotary +/-3 secs per 360 deg.
Repeatability
(Full Stroke)
X axis +/-.001
Y axis +/-.001
Z axis +/-.001
Index table (1
degree – standard) +/-
1.5 sec
B axis rotary
(optional) +/- 1 sec
Air Supply
Pressure 5.5kg f/cm square or more
Delivery 800ltr/min
Power Supply 64kVA
Machine weight Approx
32,000kg
Fanuc 16MC Standard Features
Minimum increment
0.001mm, Linear and circular interpolation (Multi-quadrant)
Automatic
acceleration/deceleration, Absolute/incremental programming
Decimal point
input, Main programme/sub programme
Tape code EIA/ISO
automatic recognition, Work address tape format
Optional block
skip, Tool length and radius compensation (200 sets)
Backlash
compensation, Mirror image, Dry run, Automatic operation (tape, memory, MDI)
Single block
operation, Data protection key, Background editing function
Extended part
programme editing, Registered programmes (100 off)
Self-diagnostic
function, Emergency stop, Ape reader with reels, Manual pulse generator
Single direction
positioning, Cutter compensation mode ‘C’, Canned cycles
RS 232 C interface,
Stored pitch error compensation, Friction control, Feed forward function
Helical
interpolation, Skip function, Automatic corner override, Co-ordinate system
rotation
Additional work
offsets (48), Optional block skip addition, Programmable mirror image
T4 digit, 320
metres memory
Machine Standard Features
Makino MPC-2
(machine tool controller), Pallet changer with 2 pallets (1300 x 1300mm)
Mori scale
feedback X, Y, Z axis (0.1 micron), Splash guard, Automatic spindle lubrication
temperature control, Coolant supply, Rapid traverse override, Manual pulse
generator
Automatic voltage
regulator, Hydraulic tank unit, Machine levelling blocks and screws
Slideway
lubrication, Slideway lubrication pressure check, Pallet random programme
selection
ATC safety cover, Oilmatic
flow detector, Pilot light, Machine light
Splash guard door
interlock including shot pin solenoid, Tool offsets 200, 8 nozzle coolant
Air drier, Coolant
flow detector, Coolant level indicator, Machine working meter, Column safety
cover
Additional Machine Features
4th Axis Option, NC rotary table with inductosyn scale (B axis)
Spindle
Attachments
25°angle spindle attachment (Rotary programmable), Fixed tilt
angle 25°
Angle spindle speeds 200 to 15000 min-1, Taper
DIN 69063 1/10 Taper
Spindle power source Built-in motor
drive, Spindle motor output and torque 15/11 kW 3.18/18.9 N⋅m, characteristic (30 min. / cont.), Main bearings Angular
type bearings, inner ø80 mm, Tool clamping Dish-spring clamp, Tool changing ATC
is available
Attachment clamping Manual, stud bolt
clamp, Swivel angle/C-axis ±185°
C-axis indexing unit 0.0001°, Through-spindle coolant, Tool offset function for 25°
Monitoring
Functions
Automatic
measuring system (AMS) (Includes 300 custom macros)
Auto non-contact
tool measurement system (Moveable type)
Adaptive control
and tool life monitor
Automatic splash
guard for standard machine
Mist collector
with joint face
Coolant/Swarf
Management
Large drag
conveyor for removal of high volume aluminium
Through spindle 25
litres per min @ 28 bar
Nozzle coolant 50 litres
per min @ 5 bar
Overhead wash 120 litres
per min @ 5 bar
Telescopic wash
120 litres per min @ 5 bar
Wash gun 20 litres
per min @ 5 bar
Fanuc 16MC
Options
Tape memory 1280-m,
Data server function (includes buffer mode), Additional tool offset memory (200
sets), High speed skip function, Auto Z axis retract and restart, Super GI
control, memory operation and DNC operation, ATC operation panel with tool
number display
Dealer: SCANTOOL AB
Price request