Fellows - 10-4

  • BrandFellows
  • Type/Model10-4
  • Stock Number29369

Technical details

  • Diameter254 mm
  • Module0 mm
  • Axial travel2 mm
  • CNC BrandGeneral Electric
  • CNC ModelGE Fanuc Powermate D 2-Axis CNC Control

Reference #29369
 
 
FELLOWS 10-4 CNC Gear Shaper
Serial No.: 34852
 
FEATURES:
GE Fanuc PowerMate D 2-Axis CNC Control, 1999 Retrofit
Hydraulically Operated Collet Fixture
11 kw Main Drive Motor
102 mm Bore Workslide Cylinder
Outboard Support
Tapered Riser Block, (51 mm Front, 25 mm Rear)
Tailstock
 
CAPACITIES:
Max Pitch Diameter, External .......... 254 mm
Min Pitch Diameter, Internal .......... 254 mm
Max Diametral Pitch, Spur ............. 4 DP
Max Diametral Pitch, Helical .......... 5 DP
Max Face Width ........................ 102 mm
Max Helix Angle w/ 5" Cutter .......... 45 Deg
Max O D of Fixture .................... 102 mm
Max Stroke Length ..................... 483 mm
Max Strokes Per Minute ................ 800 SPM
Distance - Tabletop to Spindle ........ 203 mm
Feed Per Stroke ....................... .001-.040
Cutter Spindle Diameter ............... 90 mm
Work Spindle Bore Diameter ............ 149 mm
Work spindle bore depth ............... 254 mm
Table Top to Cutter Spindle Underside,
- In Uppermost Position ............... 336 mm
Worktable C L to Cutter Spindle CL .... 230 mm
Maximum OD of Fixture ................. 483 mm
Rotary Feed Per 1" of Stroke ......... .0254 mm-.3048
Rotary Feed For Multi-Pass ........... .0254 mm-.508 mm
Radial Feed Range Per Stroke ......... .0254 mm-.508 mm
Max Radial Feed Per Minute ........... 3 mm
Machine Dimensions ................... 2362 mm x 2616 mm
Machine Height ....................... 2565 mm
Approx. Machine Weight ............... 5447 kg
 
EQUIPPED WITH:
GE Fanuc Powermate D 2-Axis CNC Control, 1999/2000 Retrofit
Tailstock
Hydraulically Operated Cutter Guard Assembly
Hydraulically Operated Collet Fixture Clamping
11 kw Main Drive Motor
 
NOTE:
The Fanuc Powermate control is a 2-axis control and the only changes
you need to make are for index or number of teeth in the part. This is done
by changing only (2) two change gears in the back of the machine for
different numbers of teeth. If you are running production then this should
be a non-issue.
 
LOCATION:
Inspect Under Power In North Carolina
 

Dealer: PRESTIGE EQUIPMENT CORPORATION

PRESTIGE EQUIPMENT CORPORATION
Price request