Waldrich Siegen - PF F 150 (1) 530 / 400

Technische Details

  • Tischlänge12000 mm
  • Tischbreite4770 mm
  • Längsachse X12000 mm
  • Quer Y5300 mm
  • Vertikal Z4000 mm
  • Anzahl Werkzeugposition0  
  • Abstand zwischen Ständer5000 mm
  • CNC MarkeSiemens
  • CNC Modell840 D

-         
Make           : Waldrich - Siegen

-         
Typ             : PF-F-150(1)-530/400

-         
No.              : 11.093/0

-         
Age            : Overhault 2004 ( Euro 2.2 Mil)

 

-         
X       Travel         : 12.000

-         
Y       Travel         :  
7.300


Z       Travel         :  
3.000

-         
W      Travel         :  
4.000

 

-         
Between column     :     5.000

-         
Table width          :     4.730

-         
Table length                   :   12.000

-         
Table load             :
  19 t / mtr. Ca. 250 ton

-         
Table feed            :   10.000 mm/min.

W axis                  :    3.000 mm/min.

-         
T axis                            :    6.000 mm/min.
     
Cross adj. milling head    :

-         
Vert. adj. cross rail        :
 
Horizontal hydrostatic spindle ram

-         
Milling spindle Ø             :
560

-         
Milling tool taper            :
iso 60

-         
C axis feed                    :
5.000 mm/min.

-         
Milling motor                  :
90 kW

-         
Spindle speed                 :
2.500 R/pm

 

-         
Z axis stroke                 :
3.000

-         
Z axis feed                    :
2.000 mm/min.

Milling Küma Angle head WF2  90 kw-   
450

-         
Milling Küma Uni. UB1D            60 kw - 2400

-         
Milling Küma Fixed GB1D          90 kw- 2400

-         
Milling Küma Angle head WF1?

 

-         
Electric requirement 
: 3 x 400 V / 50 Hz

-         
Power requirement     
: 600 kVA / 630 Amp

-         
Capacity 4.000 L coolant true spindle 20/40 Bar

Machine is rebuild
in 2004 by Schiess

 

Bed –
Table assembly group:

 

     *  
Renewal of sliding lining

     *  
Grinding of guideway

*   Renewal of table
drive

*   Direct linear
measuring syst.

Hydrostatic

 

Portal
and cross rail:

 

     *   Modification
of adjusting spindle trape

          Zoidal spindle was recplaced with
ball screw

*   Direct linear
measuring syst.

*   New drive motors
for relization of higer

     speed on feed axes
of milling support.

New milling support with hydrostatic guideways

 Electric
system:

 

     *   Complet
elctric cabinet switchgear

     *   Complet
new wire

*   Siemens Sinumrik 840 D in 6 axis !!

 Equipment
/ parts :

*   Complet new raumag janich covers

*   Complet new double
chip conveyor

*   Complet with big
tooling packet

*   Complet with big
mounting equipment

Under power in Europe

-         
Free directly

-         
Controlled axis X / Y / Z / W / C / B axis

-         
Over all height  :
10.475 mm

-         
Over all width   :
11.934 mm

-         
Over all length  :
30.000 mm

-         
Total
weight      : ca. 350.000 Kg

Händler: MACH4METAL BV

MACH4METAL BV
Preisanfrage