Données techniques
Machine in very good condition
run in one shift (20,000 switch-on hours).
Available from January 2024
Fanuc 0i-TD control system
Centre distance 650mm
Centre height 175mm
Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off
Cross axis X travel 285mm
Feed rate 0.001-10,000mm/min
Direct, linear absolute measuring system, resolution 0.0001mm
Longitudinal axis Z Travel 800mm
Feed rate 0.001-20,000mm/min
Direct, linear absolute measuring system, resolution 0.0001mm
H1 wheelhead with B-axis and 1° Hirth serration
Three tool positions
Swivelling range -15 to +225°
Pos T2 - External grinding with grinding discs Ø500x80x203mm
Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
Cone 1:10, nominal Ø 63mm
Pos T2 - External grinding 30° with grinding discs Ø500x80x203mm
Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s
Cone 1:10, nominal Ø 63mm
Swivelling measuring probe
Pos T3 - Internal grinding unit with high frequency grinding spindle Ø120mm
Motor spindle Fischer MFM 24'-42'000 rpm, 15kW, mounting HJND 21
with oil-air lubrication and water cooling
Dressing device, not controlled, movable in X,
with dressing tool holder for 2 dressing tools MK1, height-adjustable
Workpiece headstock, mounting cone MK4
Spindle nose Ø 70mm, spindle passage Ø 26mm
Manual spindle locking, without monitoring
C-axis, accuracy +/- 0.5°
Workpiece drive 3kW, speed 1-1,500 rpm
Pneumatic lifting
Equipment:
Dittel S6000 electronic grinding detection system
with gauging sensors on both table and headstock
Accessories:
2-circuit hydraulics
3nine sanding mist extraction system
Automatic paper belt filter Flow feed, pumps and tank 375 litres
Water cooling circuit 100 litres for sanding drives
Documentation
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Marchand: BEMA WERKZEUGMASCHINEN
Demande de prix