Technical details
Control: GE FANUC Series 18i-T
Operating hours: 0
Technical data
Centre height: 275 mm
Distance between centres: 600 mm
Swing over cross-slide: 150 mm
Swing over bed: 600 mm
Turning length: 610 mm
Carriage:
Longitudinal travel (Z-axis): 600 mm
Transversal strocke (X axis): 460 mm
Resolution: 0.001 mm
Turret slide: number: 1 "DUPLOMATIC"
Number of positions turret 1: 12
Fixed tools turret 1: 6
Driven tools turret 1: 6
Inner cone diameter: 20 x 20 mm
Inner cone DIN: VDI 30
Taper in spindle:
Camlock: A2-6
Inner taper type: B 32 / B 45 / F 48
Collet bore: 24 / 36 / 42 mm
C axis
Spindle speeds:
stepless
up to: 4000 rpm
Inner taper type: F66
Internal spindle diameter: 60 mm
Feeds:
stepless
longitudinal from: 0 mm/min
up to: 5000 mm/min
transversal from: 0 mm/min
up to: 5000 mm/min
Rapid traverse:: 8 / 10 m/min
Spindle motor: 15 / 18.5 kW
Voltage 50 Hz 3x: 380 Volt
Machine's weight about: 2400 kg
Overall dimensions machine:
Length: 2500 mm
Width: 2500 mm
Height: 1800 mm
Various accessories:
3-jaw chuck diameter: 210 mm
Set of jaws
Set of jaws hard
Fixed tool holders: 25 pce
Driven tools (number): 6 pce
Set of collets: F66 (36x)
Pneumatic tailstock
Tool cabinet
Centering microscop
Rotary centre
Part separating device
Chip conveyor
Description: Fixed tools :
8x 4100.00100 B2 30x20
1x E2-30x10
2x E2-30x12
2x E2-30x16
1x E1-30x20
2x E2-30x20
2x E2-30x25
1x E1-30x25
1x E1-30x32
1x E1-30x40
1x 4100.00121 Form B
3x E4-30x25
Driven tools:
2x P.000.00126 N°4748 6'000 rpm max
3x P.011.00072 4100.00850
1x P015.00037
Dealer: MULLER MACHINES SA
Price request